Projects / Headphone stand
Headphone stand
A base, a post and an arm. Most of the time goes into sanding.
Beginner1 hour3 parts1× board
Have scraps? Check this project against your wood
Cutting diagram
Bright pieces are your parts; the dimmed wood is left over. Every cut allows ⅛″ for the saw blade.
Cut list
| Part | Qty | Width × length | Cut from | |
|---|---|---|---|---|
| A | Base | 1 | 5½″ × 6″140 × 152 mm | 1× board |
| B | Post | 1 | 1½″ × 10″38 × 254 mm | 1× board or 2× lumber |
| C | Arm | 1 | 1½″ × 5″38 × 127 mm | 1× board or 2× lumber |
How to build it
- Cut the base, post and arm.
- Round the top of the arm generously so it doesn't dent the headband.
- Screw the arm to the top of the post with glue, forming a T.
- Screw up through the base into the bottom of the post, countersinking the screw.
- Sand everything smooth, finish, and add felt pads under the base.