Projects / Raised dog bowl stand
Raised dog bowl stand
A wide top with two bowl cutouts, on two end panels.
Intermediate2½ hours3 parts1× board
Have scraps? Check this project against your wood
Cutting diagram
Bright pieces are your parts; the dimmed wood is left over. Every cut allows ⅛″ for the saw blade.
Cut list
| Part | Qty | Width × length | Cut from | |
|---|---|---|---|---|
| A | Top | 1 | 11¼″ × 20″286 × 508 mm | 1× board or ¾″ plywood |
| B | End | 2 | 11¼″ × 6″286 × 152 mm | 1× board or ¾″ plywood |
How to build it
- Buy the bowls first. The cutouts are sized to their rims.
- Trace each bowl upside down on the top, then draw a second circle ¼″ inside the first.
- Drill a starter hole and cut the inner circles with a jigsaw.
- Screw the ends to the underside of the top, 1″ in from each end.
- Finish with a waterproof coat, since the bowls will splash.